live
MODEL IDideogram:4.6@0

Ideogram 4.6

Ideogram
by
Available with Zero Data Retention

Ideogram 4.6 is Ideogram's image generation and editing model, with native output up to 4096x4096. It generates images from text at any size on a 32-pixel grid, with an optional transparent background, and edits a source image using up to four more images as references. It keeps characters recognizable across scenes and matches exact colors more reliably than Ideogram 4.5, which suits product shots, brand recoloring, and campaign variations.

Ideogram 4.6

Brand colors

How to hold Ideogram 4.6 to exact brand colors: hex codes in the prompt, a closed palette for a design, product recolors to a hex and muted colors.

Introduction

"Deep green" describes many different greens, and a model asked for one picks whichever it likes. For a brand, that is the difference between packaging that matches the shelf and a reshoot.

Ideogram 4.6 takes colors as hex codes in the prompt and holds them, on generated designs and on edits alike. The box below was briefed with three of them, one each for the outside, the wordmark and the tissue paper.

This guide covers naming colors with hex codes, limiting a whole design to a palette, recoloring a product to an exact hex, muted colors and color samples, and checking the result.

Naming colors with hex codes

Write each color as a hex code followed by a plain name, and attach it to the part of the image it belongs to. The code pins the exact value. The name says what kind of color it is, which helps the model keep it apart from the other colors in the prompt.

an open rigid shipping box printed in solid #1F4E3D deep pine green on the outside,
with the wordmark "VERDANT" in #F2B134 saffron capitals on the lid ...
folded #F5EFE6 cream tissue paper ...
Use exactly these colors for the box, the wordmark and the tissue.

Each code sits next to the noun it colors. A list of codes at the end of the prompt says which colors to use but not where, and the closing sentence repeats the assignment so it reads as a rule.

The amber of the bottles has no code, so it keeps its natural color. Pin only the brand surfaces, and the brand colors read as the brand.

A palette for a whole design

For a graphic, every pixel belongs to the brand, so the prompt closes the palette: it lists the colors and says the design is limited to them.

"Strictly limited to this color palette" turns the list into the whole palette rather than a starting point. Each color also gets a job (background, numbers, icons, text), so the slide uses them in fixed roles. Reuse that palette line, roles included, in every slide's prompt to keep a carousel consistent.

Recoloring a product to a hex

To recolor an existing product, pass the photo in inputs.referenceImages and put the hex in the instruction. Each colorway below is one edit of the same white packshot.

The instruction names the part that changes, the shell, and the finish it keeps. List the parts that keep their color in the keep clause, because a recolor left to guess may take the straps and the visor along with the shell.

Start the colorways from a white or light gray product. A light surface takes any hue without carrying a tint of its old color, and the shading on it is the shading the new color needs.

Muted colors and color samples

A color name pulls toward the familiar version of that color. For a bright color, the familiar version is the one you meant, so the helmets above land on their codes. A muted color is where it drifts: the gray teal below came back deeper and more saturated than its hex until the prompt said in words how muted it is.

The front entrance of a white brick townhouse with a light gray six-panel door, brass hardware, a transom and two boxwood topiaries

Real estate curb appeal photograph of the front entrance of a white-painted brick townhouse: a six-panel front door painted plain light gray with polished brass hardware and a brass kick plate, a white door frame with a glass transom above, two stone steps, and a pair of potted boxwood topiaries on either side of the door. Shot straight-on at standing height with a 35mm lens, soft overcast daylight, crisp detail.

Source#2F5D62
Try in Playground
import { createClient } from '@runware/sdk'

const client = await createClient({ apiKey: process.env.RUNWARE_API_KEY })
await client.connect()

const [result] = await client.run({
  model: 'ideogram:4.6@0',
  positivePrompt: 'Paint the front door in image 1 #2F5D62, a muted grayish teal, in a satin finish. Keep the brass hardware, the door frame, the transom, the brick, the steps, the topiaries and the light of image 1 unchanged.',
  inputs: {
    referenceImages: [
      'https://assets.runware.ai/guides/ideogram-4-6/brand-colors/source-door.jpg'
    ]
  },
  width: 2048,
  height: 2560
})
import asyncio
import os

from runware import Runware


async def main():
    async with Runware(api_key=os.environ["RUNWARE_API_KEY"]) as client:
        results = await client.run({
            "model": "ideogram:4.6@0",
            "positivePrompt": "Paint the front door in image 1 #2F5D62, a muted grayish teal, in a satin finish. Keep the brass hardware, the door frame, the transom, the brick, the steps, the topiaries and the light of image 1 unchanged.",
            "inputs": {
                "referenceImages": [
                    "https://assets.runware.ai/guides/ideogram-4-6/brand-colors/source-door.jpg"
                ]
            },
            "width": 2048,
            "height": 2560
        })


asyncio.run(main())
curl https://api.runware.ai/v1 \
  -H "Authorization: Bearer $RUNWARE_API_KEY" \
  -H "Content-Type: application/json" \
  -d '[
    {
      "taskType": "imageInference",
      "taskUUID": "6b3e8f12-9c47-4a5d-b2e0-1f7a4c9d3e68",
      "model": "ideogram:4.6@0",
      "positivePrompt": "Paint the front door in image 1 #2F5D62, a muted grayish teal, in a satin finish. Keep the brass hardware, the door frame, the transom, the brick, the steps, the topiaries and the light of image 1 unchanged.",
      "inputs": {
        "referenceImages": [
          "https://assets.runware.ai/guides/ideogram-4-6/brand-colors/source-door.jpg"
        ]
      },
      "width": 2048,
      "height": 2560
    }
  ]'
runware run ideogram:4.6@0 \
  positivePrompt="Paint the front door in image 1 #2F5D62, a muted grayish teal, in a satin finish. Keep the brass hardware, the door frame, the transom, the brick, the steps, the topiaries and the light of image 1 unchanged." \
  inputs.referenceImages.0=https://assets.runware.ai/guides/ideogram-4-6/brand-colors/source-door.jpg \
  width=2048 \
  height=2560
{
  "taskType": "imageInference",
  "taskUUID": "6b3e8f12-9c47-4a5d-b2e0-1f7a4c9d3e68",
  "model": "ideogram:4.6@0",
  "positivePrompt": "Paint the front door in image 1 #2F5D62, a muted grayish teal, in a satin finish. Keep the brass hardware, the door frame, the transom, the brick, the steps, the topiaries and the light of image 1 unchanged.",
  "inputs": {
    "referenceImages": [
      "https://assets.runware.ai/guides/ideogram-4-6/brand-colors/source-door.jpg"
    ]
  },
  "width": 2048,
  "height": 2560
}
Response
[
  {
    "taskType": "imageInference",
    "taskUUID": "6b3e8f12-9c47-4a5d-b2e0-1f7a4c9d3e68",
    "imageUUID": "c58d2a7e-3b91-4f06-8e4c-9a1d6b3f2e74",
    "imageURL": "https://im.runware.ai/image/os/a14d18/ws/2/ii/c58d2a7e-3b91-4f06-8e4c-9a1d6b3f2e74.jpg"
  }
]

"A muted grayish teal" gives the character of #2F5D62 in words: its hue and how much gray is in it. Without that phrase, the same edit came back as a deep, saturated teal, and the description is what holds it to the code.

The same applies to a color that arrives as a sample instead of a code: a paint chip or a fabric card. Passed as a flat reference image, a chip of this teal came back as deep and saturated as an undescribed hex. Turn the sample into a hex with a color picker on its flat center, then write it the way the door prompt does: the code, then its character in words.

Checking the result

A rendered surface is lit, so no single pixel is the hex. The lit side of the helmet is lighter than the code and the shadowed side darker, and that shading makes it read as a painted object instead of a flat sticker.

Check the color where the light is even: average a patch on a flat, evenly lit area, away from highlights, shadows and edges, and compare it with the hex in a color picker or as a ΔE (CIEDE2000) value. Under about 2 reads as the same color to most people.

Measure the file that ships, after export. A color profile conversion on the way to the web or to print shifts every value.

Tips

  1. Write a hex code and a plain name. The code pins the value, and the name tells the model what kind of color it is.

  2. Describe a muted color in words. "A muted grayish teal" holds a dusty color that a bare name pushes toward its saturated version.

  3. Put each code next to the part it colors. A list of codes at the end says which colors to use but not where.

  4. Pin only the brand surfaces. Let the rest of the scene keep its natural colors.

  5. Close the palette for graphics. "Strictly limited to this color palette" with a job for each color keeps a series consistent.

  6. Recolor from a white or light gray product. The new color takes the existing shading without a tint of the old one.

  7. Turn a sample into a hex. Pick the color from the flat center of the chip and write it with its character in words.

  8. Measure on an evenly lit patch. Highlights and shadows are supposed to differ from the code.